Learn, explore and understand in your preferred language.
iPhone 13, 13 Pro & 13 Pro Max Green Screen / Display Glitching – Display Strip Repair & Jumper Solutions
If you’ve worked on iPhone 13 series displays, you may have come across green screen, green lines, flickering or display glitching problems.
In some cases, the display may show a completely green screen, while in other cases, green lines appear or the display starts behaving abnormally.
One thing worth checking before replacing the complete display is the display strip (flex) connection. Sometimes the problem is related to a damaged or disconnected connection on the display strip itself.
In this article, I’m sharing three display strip repair and jumper solutions for:
-
iPhone 13
-
iPhone 13 Pro
-
iPhone 13 Pro Max
I’ll also explain how to check GR values and voltage on the display strip pads, identify missing connections and perform jumper repairs.
These methods are based on my practical repair experience. I’ve included separate reference images for all three models.
Why Does the iPhone 13 Series Display Develop Green Screen or Glitching Problems?
From my repair observations, one possible reason for these problems is a connection failure on the display strip.
High temperatures and voltage fluctuations may contribute to weakening or damaging connections between the display strip and its COF (Chip On Film) circuit.
When a connection becomes disconnected or damaged, the display may develop green lines, green screen or other abnormal display behaviour.
However, not every green screen issue has the same cause. OLED panel damage and other display circuit faults can produce similar symptoms.
That’s why I prefer checking the actual GR values and voltage before deciding which repair method is required.
Before Starting the Repair – What Do You Need?
For this repair, keep the following equipment ready:
-
Digital multimeter with diode mode.
-
Multimeter with DC voltage measurement.
-
Microscope.
-
Suitable precision scraping tool.
-
Jumper wire.
-
Soldering station.
-
Known-good display or measurement reference, if available.
-
Flex bonding machine for COF-related repairs, when required.
1. Prepare the Display Strip Pads
First, identify the required points shown in the respective model’s jumper solution image.
Carefully remove the protective coating from the selected display strip pads to expose the contact points.
A few things to remember:
-
Work under a microscope.
-
Scratch the selected points carefully.
-
Expose the contact surface without damaging the copper track.
-
Avoid scratching neighbouring tracks.
-
Make sure the pads are clean before taking measurements.
The exposed pads will be used for GR value and voltage checking.
2. Check GR Value Using Diode Mode
This is the first important step in my repair procedure.
After preparing the pads, connect the display to the phone’s motherboard. Keep the phone powered OFF and the battery disconnected while taking diode-mode measurements.
Set your multimeter to diode mode.
Probe arrangement:
-
Red probe: Connect to GND. You can use a suitable grounded point, such as the grounded shield of the touch IC.
-
Black probe: Touch each exposed display strip pad one by one.
Now check the GR values of all the points shown in the corresponding reference image.
Record the readings and compare them with a known-good reference wherever possible.
What should you look for?
-
Missing GR reading.
-
Abnormal GR reading.
-
Open connection.
-
Difference between the affected and working reference points.
If a particular point has a missing GR reading, don’t immediately connect a jumper. First confirm that the pad or track connection is actually open and that the point is supposed to have that connection.
Once you identify the missing connection, proceed with the corresponding jumper solution.
3. Check Voltage Using DC Mode
After GR value checking, the next step is voltage measurement.
For this test, the display must remain connected to the phone’s motherboard.
Follow these steps:
-
Change the multimeter to DC voltage mode.
-
Connect the black probe to GND.
-
Reconnect the battery.
-
Switch ON the phone.
-
Before the display illuminates, check the voltage at each exposed point.
-
Record the readings and compare them with a working reference.
Check each point carefully without shorting neighbouring pads.
The voltage will depend on the particular connection and operating condition. Not every point should have the same voltage.
Important: iPhone 13 series displays use OLED technology, so technically they do not have a conventional LCD backlight. Here, the measurement timing refers to the period before the display illuminates or completes its display initialization.
4. iPhone 13 Display Strip Jumper Solution
Model: iPhone 13
The standard iPhone 13 requires particular attention during this repair.
If your GR value checking identifies a missing connection on the display strip, refer to the jumper points shown below.
iPhone 13 Jumper Connection Reference
Figure 1: iPhone 13 display strip pad repair and jumper connection reference.
Carefully expose the required pads and verify the missing connection.
Apply the jumper according to the reference image and check continuity after completing the connection.
Special Note – Why Is iPhone 13 More Difficult to Repair?
From my repair experience, the standard iPhone 13 is more difficult to repair compared with the iPhone 13 Pro and 13 Pro Max.
The reason is that the COF (Chip On Film) connection can become disconnected from the display strip. In these cases, a normal jumper connection may not be enough to restore the display.
If the COF bonding connection is damaged or separated, the required repair may involve:
-
Inspecting the COF bonding area.
-
Carefully cleaning and preparing the bonding surface.
-
Repositioning and restoring the COF connection.
-
Using a suitable flex bonding machine to complete the bonding process.
-
Testing the display after bonding.
The bonding process requires suitable equipment and experience. A simple jumper should not be treated as a replacement for a damaged COF bond.
5. iPhone 13 Pro Display Strip Jumper Solution
Model: iPhone 13 Pro
The iPhone 13 Pro has a separate display strip layout, so use its own jumper reference.
iPhone 13 Pro Jumper Connection Reference
Figure 2: iPhone 13 Pro display strip pad repair and jumper connection reference.
First, check the GR values of the exposed pads.
If you identify a missing connection, verify the corresponding point and apply the jumper according to the image.
From my repair experience, the iPhone 13 Pro has generally given good results with this jumper method.
After completing the repair, check continuity and test the display for green lines, flickering and abnormal colours.
6. iPhone 13 Pro Max Display Strip Jumper Solution
Model: iPhone 13 Pro Max
The iPhone 13 Pro Max also requires its own jumper reference. Do not assume that the standard iPhone 13 or 13 Pro connection points are identical.
iPhone 13 Pro Max Jumper Connection Reference
Figure 3: iPhone 13 Pro Max display strip pad repair and jumper connection reference.
Follow the connection points shown in the image.
Check the GR values, confirm the missing connection and apply the jumper carefully.
In my repair experience, the iPhone 13 Pro Max has also generally responded well to this jumper method.
7. What If the Jumper Solution Doesn’t Work?
Sometimes the jumper alone may not solve the problem.
In that situation, continue diagnosis instead of repeatedly modifying the same connection.
Follow these checks:
A. Recheck GR values
Check whether the repaired points now show the expected readings. Compare them with the original measurements and a known-good reference.
B. Recheck voltage
Check whether the required voltage is present at the corresponding points under the correct operating conditions.
C. Inspect the complete display strip
Check for other broken tracks, damaged pads or disconnected connections.
D. Check the COF IC and bonding
If the strip connection is damaged around the COF area, the problem may require COF IC bonding repair rather than another jumper.
If the COF connection cannot be restored reliably, replacement of the COF-related assembly or complete display may be necessary, depending on the available repair method.
E. Test with a known-good display
If the strip and bonding connections are confirmed good but the problem remains, test with a known-good compatible display.
If the replacement display works correctly, the original display assembly is likely defective.
8. My Personal Repair Experience – Final Diagnosis
The following observations are based on my own repair experience with these three models. They are practical findings, not a guarantee that every device will have the same fault.
| Model | My repair observation |
|---|---|
| iPhone 13 | More difficult. COF disconnection or bonding damage may require flex bonding machine work. |
| iPhone 13 Pro | Generally good results with the corresponding jumper solution. |
| iPhone 13 Pro Max | Generally good results with the corresponding jumper solution. |
One important thing: if the GR value or voltage is missing, first identify the exact faulty connection.
If the jumper does not restore the expected connection, investigate the COF IC and display strip.
If the COF bonding is damaged, perform the required bonding repair. If the original display cannot be restored, the final option may be replacing the complete display assembly.
Don’t directly replace the COF IC or display without confirming the actual fault.
9. Important Technician Precautions
-
Always disconnect the battery before diode-mode measurements and soldering.
-
Use suitable insulated probes when checking voltage on a powered display.
-
Avoid shorting adjacent exposed pads.
-
Use a microscope while preparing the display strip pads.
-
Don’t damage the copper tracks while scratching the protective coating.
-
Verify the jumper endpoints before soldering.
-
Insulate the completed jumper properly.
-
Use suitable temperature and pressure settings for COF bonding according to the equipment and display assembly.
-
Test the display thoroughly before final assembly.
Frequently Asked Questions
1. What causes green screen problems on iPhone 13 series displays?
Possible causes include damaged OLED panels, broken display strip connections, COF bonding faults and other display circuit problems. Proper diagnosis is required to identify the actual cause.
2. How do I check GR value on the iPhone 13 display strip?
Expose the required display strip pads, connect the display to the motherboard with the phone powered off and battery disconnected, select diode mode, connect the red probe to GND and touch each pad with the black probe.
3. How do I check voltage on the display strip?
Keep the display connected to the motherboard, select DC voltage mode, connect the black probe to GND, power on the phone and measure the exposed points during the appropriate display initialization stage.
4. Why is the iPhone 13 more difficult to repair?
In my repair experience, COF bonding disconnection can make the standard iPhone 13 more difficult. Some cases require COF cleaning, alignment and rebonding using a suitable flex bonding machine.
5. Can iPhone 13 Pro and 13 Pro Max be repaired using jumper connections?
In my experience, the corresponding jumper solutions have generally produced good results on the iPhone 13 Pro and 13 Pro Max. However, the actual fault must be confirmed before applying them.
6. What should I do if the jumper doesn’t work?
Recheck GR values and voltage, inspect the complete display strip and check the COF bonding. If the original display assembly cannot be restored, test with a known-good display and replace the defective assembly if necessary.
Have Another Working Solution? Share It With Other Technicians!
The three jumper solutions shared in this article are based on my practical repair findings.
If you have another working jumper method, GR value reference, voltage measurement or COF bonding solution for the iPhone 13 series, feel free to share it in the comments.
Even a small repair finding can help another technician save time and solve a difficult problem.
If you have a better solution, share it here. Your experience may help someone else!
Let’s share our knowledge and grow the mobile repairing community together.
More practical mobile repairing solutions and technical references are available on TechFixa.
November 15, 2026 @ 8:36 pm
Good information 👍
Keep going
November 15, 2026 @ 10:02 pm
Thank you! 🙌 Your support motivates us to share more useful technical content. Keep learning with TechFixa!